Results for "salt water generator"

Water Chemistry Medium 2-4 days for complete dissolution 797 👍 2

How to Dissolve Pool Stabilizer (CYA) - Complete Guide

Around $800 worth of granular cyanuric acid is just sitting on my pool bottom — would my warranty cover this stabilizer dissolution mess before I drain 20,000 gallons? I have a 20,000 gallon inground pool and my current CYA reading is around 15 ppm - I need to get it up to about 50 ppm. I tried just broadcasting the granules directly into the pool like I do with other chemicals, but they seem to just sink to the bottom and sit there without dissolving much.

I've heard that cyanuric acid is notoriously slow to dissolve compared to other pool chemicals. What's the most effective method to get this stuff into solution? Should I be pre-dissolving it somehow, or is there a specific technique that works better? I want to make sure I'm doing this right and not wasting product or creating hot spots in my pool.…more

Read answer

Algae Green Pool Medium 4-6 hours 522 👍 0

Can I Shock Pool After Adding Algaecide? Complete Guide

Spent all morning watching my pool turn green with algae patches and now I'm holding bottles of algaecide and shock with no clue which to use first. But I'm not sure about the timing - can I add both in the same day? Should I put the algaecide in first, or does it matter?

Also, if I can use both, how long should I wait between adding them? Don't want to mess up my water chemistry or waste expensive chemicals by doing this wrong!…more

Read answer

Water Chemistry Easy 10 minutes 507 👍 0

How Long Do Pool Chemicals Last? Complete Shelf Life Guide

Somewhere in my garage I've got old pool chemicals from last season, but I can't afford to replace them all — is there a way to test if they're still good for under $20?

Specifically looking for technical specifications on how long liquid chlorine maintains potency versus granular forms, and whether chemicals like sodium bicarbonate and muriatic acid have definitive expiration parameters. Storage conditions are controlled temperature and humidity, so assuming optimal preservation environment.…more

Read answer

Product Ranking 8 compared

Best Pool Chemical Starter Kits

4.5 (18,700 reviews)

Salt Water Medium 8-24 hours 447 👍 0

Should I Turn Off Salt Cell When Shocking Pool? Expert Guide

Staring at my salt cell wondering if I need to turn it off before shocking my pool — can't afford a $200 service call right now.

Should the salt chlorine generator be turned off while administering shock treatment, or can it continue running?

I want to ensure I'm following correct procedures to avoid any potential equipment damage or interference with the shock's effectiveness. What's the standard protocol for salt cell operation during chemical shock applications?…more

Read answer

Water Chemistry Medium 2-3 days 398 👍 0

How to Fix Pool Stabilizer Level: Complete CYA Guide

Nobody warned me I'd walk out this morning to find my pool showing a 28 ppm CYA reading that has me completely baffled about what to do next.

For low stabilizer situations, what's the exact amount of cyanuric acid needed per gallon of pool water to achieve specific ppm increases? Additionally, I've read that high CYA levels present different challenges - what are the recommended approaches when levels exceed acceptable thresholds? I need reliable technical guidance for both scenarios to maintain proper water chemistry balance.…more

Read answer

Above Ground Easy 15 minutes 351 👍 0

How Long Do Above Ground Pools Last? Lifespan Guide 2024

Every YouTube video promised their above ground pool would last 20+ years, but now I'm drowning in conflicting lifespan advice and more confused than ever. I've been looking at steel, aluminum, and resin options and they're all pretty different price-wise.

Before I commit, I'd love to know how long each type typically lasts? Like, are we talking a few years or more like a decade? And does the material really make that big of a difference, or is it more about how well you take care of it? Don't want to cheap out now and regret it later when I'm dealing with rust or cracks!…more

Read answer

Filters Medium 30 minutes 312 👍 0

How Long to Run Pool Filter Daily - Complete Guide

Every pool season I feel like an idiot asking this, but I genuinely have no idea how many hours my filter should actually be running daily. My kids swim almost every day during summer, and I want to make sure the water stays clean and safe for them. I've heard different opinions - some neighbors say they run theirs 24/7, while others only run it a few hours.

I'm worried about under-filtering and having bacteria or algae grow, but I also don't want to waste electricity if it's not necessary. Our pool gets heavy use with the kids and their friends, plus we've had some really hot weather lately. What's the right balance for daily filter runtime to keep the water properly clean?…more

Read answer

Water Chemistry Easy 30 minutes 305 👍 0

Do Pool Chlorine Tablets Expire? Complete Shelf Life Guide

Walked into the garage yesterday and my wife called out my "chlorine tablet graveyard" from 2022, making me wonder if those old tablets are even safe to use.

The pool store guy keeps telling me I need fresh chemicals every year, but that seems like a money grab. How long do these tablets actually last, and how can I tell if mine have gone bad? I'm trying to save money by buying in bulk and storing extras, but I don't want to use something that could be dangerous or just won't work properly.…more

Read answer

Water Chemistry Medium 6-8 hours 289 👍 0

Can I Shock Pool After Adding Alkalinity? Timing Guide

Walked out to check my 20,000 gallon inground pool after dosing it with sodium bicarbonate this morning to raise alkalinity from 60 ppm to 100 ppm, and now I'm second-guessing my shocking timeline. My pH was sitting at about 7.2 before I added the alkalinity increaser, but I know adding baking soda can bump up the pH as well.

I'm planning to shock the pool tonight since we've had some heavy swimmer load this week and the water is starting to look a bit cloudy. Should I wait a certain amount of time after adding the alkalinity before I shock? I want to make sure the shock is as effective as possible and I've heard that pH levels can affect how well chlorine works.

My current test results show chlorine at 1.5 ppm, alkalinity should now be around 100 ppm, and I'm not sure what the pH has risen to after adding the sodium bicarbonate earlier today.…more

Read answer

Filters Medium 2-3 hours over multiple days 273 👍 0

Can You Use Pool Filter Sand in Your Garden? Complete Guide

During this morning's pool filter sand swap, I spotted this massive pile of perfectly good sand that I'm about to dump in the trash. The pool store told me it's just silica sand, but I'm worried about chemicals and chlorine that might still be in it from filtering pool water.

I've heard that sand can help with drainage in heavy clay soil, which I definitely have in my backyard. But I want to make sure I won't harm my plants or vegetables if I use the old filter sand. Do I need to clean it first or test it somehow? Any advice from experienced pool owners would be really helpful!…more

Read answer

Water Chemistry Medium 45 minutes 262 👍 0

Do Fiberglass Pools Need Calcium Hardness? Complete Guide

Pool builder says my new fiberglass shell doesn't need calcium hardness adjustments like a plaster pool does. But the water test shows 150 ppm and the internet says that's too low for any pool. Who's right here — does fiberglass actually need calcium or not?…more

Read answer

Product Ranking 8 compared

Best Variable Speed Pool Pumps

4.5 (12,400 reviews)

Water Chemistry Medium 2-3 days 259 👍 0

How to Raise Pool Stabilizer (CYA) Levels - Complete Guide

Already tried three different YouTube tutorials to raise my pool's CYA levels but somehow made them even lower than before. Pool is about 10,000 gallons. What's the right amount of cyanuric acid to add and what's the best method? Granular or liquid stabilizer?…more

Read answer

Water Chemistry Easy 30 minutes 255 👍 0

How Long to Wait Before Swimming After Pool Chemicals

Apparently I'm standing in my garage staring at three different pool chemicals I added this morning with no clue how long I actually need to wait before diving in. Yesterday I added liquid chlorine to bring my levels up from 1.2 ppm to around 3.0 ppm, and I wasn't sure if we could swim that evening or needed to wait until the next day.

I'm planning to shock the pool this weekend with calcium hypochlorite since we've had some cloudy water issues, and I also need to adjust the pH which has been running high at 7.8. The kids are eager to get back in the pool, but I want to make sure I'm following proper safety guidelines. Do different chemicals have different waiting periods, and should I always test the water first regardless of how much time has passed?…more

Read answer

Filters Medium 2-3 hours for treatment process 252 👍 0

Can Pool Filter Sand Be Used in Garden? Complete Guide

I got stuck with 200 pounds of nasty used pool filter sand that the previous owner left behind when I moved in. Been in my filter for 3 years. Wondering if I can dump this in my vegetable garden or if the chlorine and other pool chemicals make it unsafe for plants. Anyone know if there's a way to clean it first or should I just toss it?…more

Read answer

Filters Medium 45 minutes 244 👍 0

How Long Do Pool DE Filters Last? Complete Lifespan Guide

Pulled the cover off my DE filter system today and got hit with this awful musty, stagnant smell after 18 months of running it on my 20,000-gallon pool. I've been adding fresh DE powder every few weeks after backwashing, but I'm not sure how long the actual filter grids are supposed to last before they need to be completely replaced.

Lately I've noticed that my filter cycles seem to be getting shorter - I'm having to backwash more frequently than I used to, and the water clarity isn't quite as crystal clear as it was when the system was newer. My pool gets moderate use with about 4-6 swimmers regularly, and I keep my chlorine around 2-3 ppm and pH at 7.4. Are these signs that my grids are wearing out, or is this normal aging? What's the typical lifespan I should expect from DE filter components?…more

Read answer

Loading more Q&A...

You've seen all 194 Q&A articles!