My Pool Settings

Hi, I'm Splash!
Need help setting up? I can walk you through it
Pool Info
Calculate volume
Climate & Cover
Typical Chemistry

Pre-fill calculators with your usual levels (optional)

30-50 chlorine, 70-80 SWG
60-80 recommended
250-350 recommended
Equipment

Select your equipment to personalize checklists

Sync across devices

Pool Saved to Cloud

Your sync code (use this to load your profile on another device):

Write this down! There is no way to recover it if you lose it and clear your browser.
Save your pool settings for quick calculations

Quick Water Test

Enter your pool readings and get instant dosing recommendations. Fast chip-based entry with LSI calculation.

Pool Volume --
Gallons · Edit in My Pool Settings
Free Chlorine (FC) --
Target: Based on CYA level · TFP FC/CYA Chart
pH --
Target: 7.4 - 7.6
Total Alkalinity (TA) --
Target: 60 - 80 ppm
Calcium Hardness (CH) --
Target: 250 - 350 ppm
Cyanuric Acid (CYA) --
Target: 30 - 50 ppm (70-80 for SWG)
Temperature --
For LSI calculation
Salt (SWG pools) --
Target: 3000 - 3500 ppm (check your SWG specs)
Results
Water Balance (LSI)
--
Enter pH, Temp, CH, TA above
What To Add
Enter your readings above
Notes (optional)
Reading Log
No saved readings yet
Save your current readings to start tracking

Service Report

For educational purposes only — full disclaimer ↓ Always test your water and consult product labels before adding chemicals. Results are estimates only. Terms of Service.