Results for "chlorine treatment"

Algae Green Pool Medium 2-3 days 845 👍 8

How Long After Shocking Pool to Add Algaecide? Complete Guide

The pool service guy insists I wait a full 24 hours after shocking before adding algaecide, but that seems excessive when algae keeps spreading. I have two young kids who are eager to get back in the water, and I want to make sure I'm doing this chemical treatment properly.

Should I wait a certain amount of time between the shock treatment and adding the algaecide? I'm also concerned about when the water will be safe for swimming again. What chlorine levels should I be looking for before adding more chemicals, and how do I know when everything is balanced enough for the kids to swim safely?…more

Read answer

Algae Green Pool Medium 4-6 hours 522 👍 0

Can I Shock Pool After Adding Algaecide? Complete Guide

Spent all morning watching my pool turn green with algae patches and now I'm holding bottles of algaecide and shock with no clue which to use first. But I'm not sure about the timing - can I add both in the same day? Should I put the algaecide in first, or does it matter?

Also, if I can use both, how long should I wait between adding them? Don't want to mess up my water chemistry or waste expensive chemicals by doing this wrong!…more

Read answer

Salt Water Medium 8-24 hours 447 👍 0

Should I Turn Off Salt Cell When Shocking Pool? Expert Guide

Staring at my salt cell wondering if I need to turn it off before shocking my pool — can't afford a $200 service call right now.

Should the salt chlorine generator be turned off while administering shock treatment, or can it continue running?

I want to ensure I'm following correct procedures to avoid any potential equipment damage or interference with the shock's effectiveness. What's the standard protocol for salt cell operation during chemical shock applications?…more

Read answer

Product Ranking 10 compared

Best Pool Water Test Kits

4.6 (45,200 reviews)

Maintenance Medium varies by closure type 337 👍 0

How Long Can a Pool Stay Closed? Duration & Safety Limits

Between the winter thaw and spring opening every year, I'm left wondering if my pool's been closed too long and the water is now unsafe. My facility requires extended closure periods for various operational reasons, and I want to establish clear protocols for both planned seasonal shutdowns and emergency closures.

Specifically, I'm looking for data on maximum safe closure timeframes before water chemistry becomes unmanageable and equipment integrity is compromised. What are the industry standards for winterized pools versus temporary emergency closures?…more

Read answer

Water Chemistry Easy 30 minutes 308 👍 0

Can You Shock Pool After Adding Muriatic Acid? Safe Timing

Our 2019 Intex Easy Set just got muriatic acid to lower the pH but now we're wondering if we can shock it right away. I added some muriatic acid to my pool yesterday to bring down the pH (it was reading around 8.2). Now I'm wondering if I can go ahead and shock the pool today or if I need to wait? I don't want to create any dangerous chemical reactions or damage anything. The pool store guy mentioned something about waiting between chemicals but I can't remember exactly what he said. Should I test the water first or just wait a certain amount of time? Thanks for any help - still learning all this pool chemistry stuff!…more

Read answer

Filters Medium 45 minutes 294 👍 0

Can I Clean Pool Filter With Bleach? Safe Methods Explained

Somewhere in my garage looking at this disgusting pool filter with brown sludge and nasty buildup caked all over the pleats, wondering if bleach is safe. Is this actually safe to do?

I have what I think is a cartridge filter (it's the white pleated kind), and I'm worried about damaging it or my pool equipment if I use the wrong cleaning method. The pool store told me about expensive filter cleaners, but I'm wondering if regular bleach from the grocery store would work just as well. Should I dilute it somehow, and are there any types of filters I should avoid using bleach on?…more

Read answer

Water Chemistry Medium 6-8 hours 289 👍 0

Can I Shock Pool After Adding Alkalinity? Timing Guide

Walked out to check my 20,000 gallon inground pool after dosing it with sodium bicarbonate this morning to raise alkalinity from 60 ppm to 100 ppm, and now I'm second-guessing my shocking timeline. My pH was sitting at about 7.2 before I added the alkalinity increaser, but I know adding baking soda can bump up the pH as well.

I'm planning to shock the pool tonight since we've had some heavy swimmer load this week and the water is starting to look a bit cloudy. Should I wait a certain amount of time after adding the alkalinity before I shock? I want to make sure the shock is as effective as possible and I've heard that pH levels can affect how well chlorine works.

My current test results show chlorine at 1.5 ppm, alkalinity should now be around 100 ppm, and I'm not sure what the pH has risen to after adding the sodium bicarbonate earlier today.…more

Read answer

Pump Problems Easy 15 minutes 289 👍 0

Can You Run Pool Pump Without Filter? Risks & Solutions

Somewhere between my husband questioning why our pool pump is running without a filter cartridge and my growing panic, I'm wondering if I'm actually damaging something. My filter cartridge is completely clogged and I need to replace it, but my kids are asking to swim this afternoon. I'm wondering if I can just run the pump without any filter for a few hours until I can get to the pool store.

I know this probably isn't ideal, but would it cause any serious damage to the pump or create unsafe water conditions? I don't want to risk my children's safety, but I also don't want to damage our equipment if there's a way to manage this temporarily.…more

Read answer

Above Ground Medium 2-3 days 282 👍 0

Can You Paint Above Ground Pool? Complete Guide & Best Methods

Called it—after all that rain last week, my above ground pool looks even more rusty and faded than before, practically mocking me from the backyard. It's become such an eyesore that I'm embarrassed to have people over. I've been researching pool painting but getting mixed information online - some say it works great, others say it's a waste of time and money.

My pool is one of those standard metal frame ones, probably about 15 years old with some rust spots and serious fading. I'm willing to put in the work if it'll actually make a difference, but I need to know if this is even feasible or if I'm just setting myself up for disappointment. What type of paint works on these things, and do I need special prep work?…more

Read answer

Pump Problems Easy 30 minutes 273 👍 0

Can I Turn Pool Pump Off at Night? Complete Owner's Guide

This electric bill is destroying my budget and I can't afford to keep this pool pump running 24/7 — is it safe to shut it off nights?
The pool store told me the pump should run constantly, but my neighbor says he turns his off at night to save on electricity costs.

I'm worried about messing something up since this is all new to me. Is it actually safe to turn the pump off overnight, or will that cause problems with the water? If I can turn it off, how many hours should it still be running each day to keep everything clean and healthy?…more

Read answer

Filters Medium 2-3 hours over multiple days 273 👍 0

Can You Use Pool Filter Sand in Your Garden? Complete Guide

During this morning's pool filter sand swap, I spotted this massive pile of perfectly good sand that I'm about to dump in the trash. The pool store told me it's just silica sand, but I'm worried about chemicals and chlorine that might still be in it from filtering pool water.

I've heard that sand can help with drainage in heavy clay soil, which I definitely have in my backyard. But I want to make sure I won't harm my plants or vegetables if I use the old filter sand. Do I need to clean it first or test it somehow? Any advice from experienced pool owners would be really helpful!…more

Read answer

Product Ranking 8 compared

Best Salt Chlorine Generators

4.3 (6,200 reviews)

Water Chemistry Easy 30 minutes 269 👍 0

Can I Add Pool Chemicals at the Same Time? Safe Mixing Guide

Spent all week prepping for Saturday's pool party and now I'm scrambling to balance the water but wondering if I can add multiple chemicals together to save time.
The pool store gave me a bunch of different chemicals but didn't really explain the timing. I want to make sure I'm not going to create some dangerous reaction or mess up my water chemistry. Should I be spacing these out somehow?…more

Read answer

Water Chemistry Medium 4-6 hours 253 👍 0

Can I Shock Pool After Adding Baking Soda? Complete Guide

Noticed my neighbor's pool stays crystal clear when he adds baking soda then shocks immediately, but mine turns cloudy every time — what's his secret? I added baking soda to raise my alkalinity this morning, but now I'm wondering about timing.

Can I go ahead and shock the pool right away, or do I need to wait? I don't want to waste the shock treatment or mess up my water chemistry. The pool store guy mentioned something about waiting but then tried to upsell me on their "premium" shock system. Just looking for straight answers on proper timing and whether I should test anything specific before shocking.…more

Read answer

Filters Medium 2-3 hours for treatment process 253 👍 0

Can Pool Filter Sand Be Used in Garden? Complete Guide

I got stuck with 200 pounds of nasty used pool filter sand that the previous owner left behind when I moved in. Been in my filter for 3 years. Wondering if I can dump this in my vegetable garden or if the chlorine and other pool chemicals make it unsafe for plants. Anyone know if there's a way to clean it first or should I just toss it?…more

Read answer

Filters Medium 45 minutes 244 👍 0

How Long Do Pool DE Filters Last? Complete Lifespan Guide

Pulled the cover off my DE filter system today and got hit with this awful musty, stagnant smell after 18 months of running it on my 20,000-gallon pool. I've been adding fresh DE powder every few weeks after backwashing, but I'm not sure how long the actual filter grids are supposed to last before they need to be completely replaced.

Lately I've noticed that my filter cycles seem to be getting shorter - I'm having to backwash more frequently than I used to, and the water clarity isn't quite as crystal clear as it was when the system was newer. My pool gets moderate use with about 4-6 swimmers regularly, and I keep my chlorine around 2-3 ppm and pH at 7.4. Are these signs that my grids are wearing out, or is this normal aging? What's the typical lifespan I should expect from DE filter components?…more

Read answer

Loading more Q&A...

You've seen all 242 Q&A articles!