Results for "winterizing-chemicals"

Winterizing Easy 1–2 hours 60 👍 1

Where to Drain Pool Water When Winterizing

Nobody told me this part would be confusing. When I started dropping the water level to close the pool for winter, I realized I had absolutely no idea where that water is actually supposed to go. My pool is an inground, and right now I've got a submersible pump running — but I keep stopping because I'm genuinely not sure if I'm about to flood my neighbor's yard or create a problem with the municipality.

The water has to go somewhere, obviously, but there seem to be a few options and I can't figure out which one is actually correct. Is it okay to run it out to the street drain? Can I just let it soak into the yard? Or is there a hookup to the sewer I should be using instead?

I want to do this right and not get a fine or cause a drainage mess. Any guidance would be really helpful before I crank the pump back on.…more

Read answer

Winterizing Medium 2-3 hours 265 👍 0

Do You Need to Cover Pool Equipment? Winterizing Guide

Last winter I didn't cover anything and ended up with a cracked pump housing that cost me $400 to replace - apparently freeze damage is no joke.

This year I want to be smarter about it. I've got the usual setup - pump, heater, control panel, filter system. Do I really need to buy covers for all this equipment, or am I being paranoid? I keep reading conflicting advice online and I just want to protect my investment without going overboard on unnecessary gear.…more

Read answer

Winterizing Medium 45 minutes 591 👍 1

Do You Remove Skimmer When Closing Pool? Step-by-Step Guide

I opened my weather app to see the first freeze hits this weekend and I'm staring at this skimmer wondering if I need to yank it out or leave it. I know I need to do something with the skimmers, but I'm getting conflicting advice online about what exactly needs to come out.

Do I need to physically remove the entire skimmer unit from the pool wall, or just certain components? I've heard about removing baskets and doors, but I want to make sure I'm not missing anything that could get damaged over winter. Last thing I need is expensive repairs come spring after this disaster of a season.…more

Read answer

Editor's Pick

Dolphin Nautilus CC Plus Robotic Pool Vacuum (2026)

Wall-climbing scrubber brush and Wi-Fi control — ideal for in-ground pools up to 40 ft. View on Amazon →

Sponsored

Winterizing Easy 45 minutes 546 👍 1

Do I Need Pool Antifreeze? Complete Winterizing Guide

According to my old above-ground pool routine I never needed antifreeze, but now I'm questioning everything with this inground setup. My neighbor swears by it but another friend says it's totally unnecessary. I live in an area where we definitely get below freezing temps, but I'm not sure if my equipment can be completely drained or not.

What are the situations where pool antifreeze is actually needed? And if I do need it, does it matter what type I buy? Don't want to mess this up and end up with burst pipes come spring!…more

Read answer

Winterizing Medium 45 minutes 345 👍 0

Can You Cover a Pool Heater? Complete Winterizing Guide

Three different "experts" just gave me three different answers about covering my pool heater for winter — my neighbor says always cover it, the pool store says never, and YouTube is all over the place. My pool heater is a significant investment, and I'm concerned about potential damage from winter weather, debris accumulation, and moisture intrusion during the months it won't be operational.

What's the recommended protocol for covering pool heaters during winter storage? I need to understand the proper materials and methods to prevent condensation issues while still providing adequate weather protection. Are there specific cover types designed for pool heating equipment, or should I avoid covering altogether to prevent moisture-related problems?…more

Read answer

Winterizing Medium 2-3 hours 9 👍 0

Blow Out Pool Lines With a Shop Vac? Here's the Truth

Looked at the forecast last night and there's a real hard freeze coming — the kind where you can almost feel the air bite right through your jacket the second you step outside. My inground pool needs to be winterized properly, but I don't own an air compressor and I'm not sure it's worth renting one. I do have a decent shop vac that has a blow mode on it, and I'm wondering if that's actually enough to push water out of the skimmer lines and return lines, or if it's just going to move air around without really clearing anything dangerous.

The thought of a cracked pipe or a busted fitting — that dull, hollow thud you hear when frozen water splits PVC — is enough to make me want to do this right the first time. But how do I actually know when the lines are empty? Is there a sound change, a feel difference in the air coming out? I want to make sure I'm not just plugging a line that still has water sitting in a low spot somewhere.…more

Read answer

Winterizing Medium 2–4 hours (full closing day, including water adjustment and line blow-out) 172 👍 1

How Far to Lower Water When Closing Your Pool

Three weeks ago my husband and I bought our first house with an inground vinyl pool, and now everyone is telling us we need to close it for winter — but nobody can agree on exactly what that means. We have a mesh safety cover, and I've gotten completely opposite advice about how much water to drain out before we put it on. One neighbor says drop it below the skimmer, another says below the returns, and my pool store guy shrugged and said we might not even need to lower it at all with a mesh cover?

I honestly have no idea what any of those terms even mean yet, or where those parts are on my pool. I'm afraid of draining too much and damaging the liner, or not draining enough and having pipes freeze and crack over the winter. Is there a standard answer here, or does it really depend on what type of cover you're using?

Also — a few people have mentioned that the rules are different for above-ground pools and solid covers, and now I'm even more confused. Can someone break this down in plain language for a complete first-timer?…more

Read answer

Winterizing Medium 30–45 minutes 37 👍 1

What Goes in Your Skimmer When Closing for Winter?

Found myself in a debate with a neighbor and now I'm second-guessing everything I thought I knew about winterizing my inground pool. We get legitimate hard freezes here — not just a few nights of light frost — and I want to make sure I'm not cracking my skimmer housing this year.

My neighbor swears by dropping a half-filled milk jug into the skimmer and calling it a day, but a guy at the pool store told me I really need antifreeze poured in there or my skimmer will crack no matter what. A friend who closed pools professionally said just blow the lines and plug it — no antifreeze needed. Now I've got three different opinions and I'm reading about Gizzmos, rubber expansion plugs, foam backer rod, and antifreeze on top of all of it.

After blowing out the skimmer line with a shop vac, what actually needs to go into the skimmer, in what order? Is the antifreeze genuinely necessary or is that the pool store upselling me? And does it matter whether I use a Gizzmo versus a rubber plug versus the milk jug trick?…more

Read answer

Above Ground Medium 4-8 hours 623 👍 0

How to Drain Above Ground Pool - Complete Safety Guide

Three different sources are telling me wildly different drain times for my above ground pool — my contractor says 6-8 hours but the pump manual clearly states 2-3 hours maximum. Now they want to charge me $300 just to drain my above ground pool for the winter! That's ridiculous.

I know I can do this myself but I want to make sure I don't mess up my liner or damage anything. What's the safest DIY method to drain it? I've heard about using pumps or some kind of siphon thing, but I don't want to risk doing it wrong and having to buy a whole new pool setup.…more

Read answer

Filters Medium 45 minutes 549 👍 0

Can I Leave Pool Filter Outside for Winter? Storage Guide

This Hayward sand filter is sitting in my backyard and the pool store warned me the housing will crack if I leave it outside this winter. They're saying I absolutely MUST bring my filter inside and store it properly or it'll crack from freezing water. Is this just another upsell, or will my filter actually get damaged if I leave it outside during winter?

I'm in a climate that gets below freezing, and I'm trying to handle as much of the winterization myself as possible. The pool store quoted me $200 just for filter removal and storage! Can I really not just drain it well and leave it in place, or am I risking expensive damage? Looking for honest advice from people who've actually dealt with this.…more

Read answer

Winterizing Medium 2-4 hours 291 👍 0

Should You Cover Pool Equipment in Winter? Protection Guide

After 8 years, my pool pump and filter system are developing rust spots — should I invest in winter covers or just replace everything? They're pushing these fancy insulated covers for my pump, heater, and control panel, but I feel like they're just trying to empty my wallet again.

Do I actually need to cover all my pool equipment for winter, or is this another one of their money grabs? If protection is really necessary, are there cheaper DIY alternatives that work just as well? I'm sick of spending a fortune on overpriced pool store solutions when there might be simple ways to winterize my equipment without breaking the bank.…more

Read answer

Product Ranking 8 compared

Best Pool Heaters

4.4 (8,900 reviews)

Winterizing Easy 30 minutes 70 👍 0

Gizzmo vs Rubber Plug: Best Way to Winterize a Skimmer?

During every fall closing season, I find myself second-guessing the advice I get at the pool store. This year I'm closing my inground pool on my own for the first time, and the store recommended I pick up a Gizzmo for the skimmer. The thing is, my neighbor has been closing his pool for years using nothing more than a rubber plug and a jug of antifreeze poured into the skimmer basket — and his skimmer has never cracked.

So now I'm wondering: does a Gizzmo actually do something fundamentally different, or is it just a more expensive version of the same idea? And the guy at the store also mentioned keeping the skimmer cover plate on top. Is that step necessary if I already have the Gizzmo in place, or is that overkill?…more

Read answer

Loading more Q&A...

You've seen all 12 Q&A articles!